Is the Ethernet port on the wall not working? Here's how to fix it!

Is your Ethernet port in the wall not working and you have no idea how to fix it?

In this post, you will become familiar with the issue and learn handy troubleshooting methods to easily resolve it.

In order to fix your ethernet port, you need to check whether your Ethernet cable is working properly. Use a TDR device to identify breaks and harmful issues within your coaxial cables.

Furthermore, you can check the slot of your ethernet cable by trying to use another (working) one."

In case this isn't enough, let's find out what else might be causing the problem and then figure out how each one can be resolved.

How to Fix Ethernet Ports in Walls?

You'd be bothered if your ethernet port in the wall wasn't working correctly if you don't have a solid internet connection today.

This problem might be caused by several factors that are impacting your port's functionality.

Your cables and coaxials' infrastructure are mostly hidden behind your walls and floors, as you probably know.

The problem could be with the Ethernet jack itself and not the wiring. In case all Ethernet ports are not working, there is a connection issue or there is no Internet.

"Usually, the ethernet ports’ functionality could be interrupted if your connectors aren’t working as intended. "

Because of this, we'll start troubleshooting the connector components of your internet wiring first.

In no particular order, here are the most successful methods for resolving Ethernet outlet issues.

How Do I Fix An Ethernet Outlet That Doesn't Work?

When you know what might interfere with your Ethernet wall outlet's functionality, let's move on to troubleshooting.

"Note: We must inform you that all those fixes won’t fix the problem if it is located behind the wall."

Your ethernet ports may need to be reconfigured by an IT or electrical engineer in that case.

#1 Check Condition

There could be severe damage to the wall's ethernet port if it isn't working.

In addition, water inside the connector can prevent data transmission, so make sure to inspect it closely.

Over time, components degrade and a switch up is naturally required.

By doing this, you will not only keep your Ethernet wall outlet from burning up, but you will also avoid degrading the process, which may damage the slot.

Assuming all components in the workflow are in good condition, let's look at the wiring.

#2 Verify Cable Connections

The first thing to check is the functionality of the wall socket itself. Try using a working ethernet cable. If the cable does not work, then the issue is with the outlet.

You probably won't be able to discover all the reasons for cable failures on your own.

For now, there is one thing you can do to resolve the issue.

"Make sure that the cable is properly connected to the back of the jack. "

After this, it would be easy to re-install it into the wall jack.

If you have no experience setting up wiring, please let someone who does know what they're doing handle the job.

In addition, there are a lot of guides on how to wire the panel correctly, so please feel free to check them out.

#3 Check Connectors Condition

The next most common problem is the connectors. First, you have to remove the jack from the wall and check the connectors.

You will be able to better identify the source of the problem and redirect your troubleshooting accordingly.

Our recommendation would be to take a closer look at the copper on the ends of the connector. This part is intended to transfer the current, so it is important to make sure it isn't worn out.

In case of obvious damage, replace the component immediately!

Your wall outlet might just start working again if the connectors are causing the issue.

#4 Check the Cable

If you are doing a fix like this at home, things can get quite complicated.

The first thing we would suggest is that you should never use any other form of wiring than the Ethernet cable designed specifically for this purpose.

When you use foreign wiring that isn't designed for the purpose, it will have a significant impact on the connections' functionality.

Our recommendation is to only use an Ethernet cable that's similar to your original one, in terms of specifications. By doing so, you'll maintain your connection and enjoy significant speed.

"Note: If you had already placed them together, you would have to locate them apart to ensure that both connectors are working correctly."

Following their separation, you will need to pull out and remove the whole cable from inside the wall.

As a result, you will be able to inspect worn-out parts and signs of malfunctions such as a burned or ripped cover. We suggest also checking the cable outside the wall to see if it can carry a signal.

In cases where your cable is simply damaged or stops working for no apparent reason, you might have to start worrying. In such cases, you will need to replace the whole component between the two points.

Eventually, the jack just might start working as it usually does. However, such a malfunction could cause a short circuit or other power issues that you definitely don't want.

Ethernet Port Not Working In Wall Issue Still There…

Possibly the hardest part of fixing a non-working Ethernet port in a wall is this process.

You might want to check if you've tried all other steps before taking this one.

Wouldn't it be a shame to go through all of this, only to find out that the problem is with the wiring or the cable connectors?

You may have to seek further assistance if nothing has worked so far.

Ultimately, this type of work is not for everyone, and only specialized technicians may be able to determine and fix the issue.

You can look for someone skilled in this area within your local area and explain the issue. They will have specific tools that can eliminate the problem and get your ethernet wall slot working again.